Detail KLARK TEKNIK DN370 | GRAPHIC EQUALIZER
With DN370 we’ ve started from the ground up and produced a unit that is totally without compromise, and one that we believe is the finest professional graphic equaliser in the world today. It also perfectly complements the existing Klark Teknik range of equalisers, both analogue and digital.
DN370 Technical Specifications :
* Inputs Two
Type Electronically balanced ( pin 2 hot)
Impedance ( © ) 20k
Maximum input level + 22dBu
* Outputs Two
Type Electronically balanced ( pin 2 hot)
Minimum load impedance 600 ©
Source impedance 2k©
* Performance
Frequency response relative to signal at 1kHz ± 0.5 dBu 20Hz-20kHz
EQ out ± 0.5 dBu
EQ in ( flat) ± 0.5 dBu
Distortion ( THD+ N) 114dB ( 20Hz-20kHz unweighted, ± 12dB range)
Overload indicator + 20 dBu
Gain - to + 6dBu
Equalisation 30 Bands
Centre Frequencies To BS EN ISO 266: 1997 25Hz-20kHz, 1/ 3 octave tolerance ± 5%
Maximum Boost/ Cut ± 12dB, ± 6dB
High Pass Filter Slope 12 dB/ octave
Low Pass Filter Slope 12 dB/ octave
Notch filter attenuation > 17dB
Q= 32
* Terminations
Audio 3-pin XLR and 6-pin Phoenix
Power 3-pin IEC
* Power Requirements
Voltage 100V-240V a.c.
Consumption < 60W
* Dimensions
Height 133mm ( 5.25 inch) ( 3U High)
Width 482mm ( 19 inch)
Depth 205mm ( 8 inch)
Tampilkan Lebih Banyak